TAD M2500 / 4300 Power amplifier

TAD M2500 Power Amplifier

With the TAD-M4300 and TAD-M2500 power amplifiers, TAD continues its mission of providing audio quality that sounds truly natural. Using Class D circuitry in a completely balanced structure, TAD amplifiers achieve unprecedented levels of performance. The next generation of power amplifiers has now arrived.

In order to provide precise speaker drive to the utmost limits, TAD strives for symmetry in both circuitry and structure, with the goal of achieving perfect balance. By completely separating left and right channels from input to output, along with power supplies and transformers that are separated between both left and right channels and positive and negative rails, complete symmetry is maintained. Utilizing a bridged transformer-less design with two amps in a balanced configuration, the TAD-M4300 and TAD-M2500 deliver high output power of 300W/4ch and 500W/2ch respectively.

To provide an overwhelming feeling of speed and energy, the analog power supply is equipped with a high capacity toroidal power transformer and electrolytic capacitors. Combined with a Class D output stage, the result is high purity amplification with superior high speed response. For optimum sound, TAD adopted very low on-resistance power MOSFETs with no lead wires. Maintaining low heat generation thanks to the high efficiency of Class D, the amps achieve high power without heat sinks.

In order to control vibration that affects the sound, the chassis is machined from a 90kg block of aluminum, effectively eliminating all joints other than connections. This helps stabilize the ground potential, further improving sound purity. It also provides both high stiffness and high internal loss, achieving improved sound quality. A three-point cast-iron insulator dampens any vibration transmitted through from the feet.

The precisely machined chassis is formed from a solid block of aluminum. The twin tones of silver and black for the divided upper and lower halves produces a striking appearance.The elegant clean design, extending to every detail, such as the elimination of visible front panel screws, ensures that either amplifier will harmonize beautifully with any room.

TAD M2500 Specifications


  • Power output 500 W / 4Ohm, 250 W/ 8Ohm 20 Hz to 20 kHz, T.H.D., 1.0 %
  • Analogue Inputs: Xlr, Rca
  • Input impedance 1.5 V/220 kOhms(Balanced) 0.75 V/47 k Ohms(Unbalanced)
  • Gain 29.5dB
  • Power consumption 250W
  • Standy by power consumption 0.5W
  • Rated THD 0.05% (20 Hz to 20 kHz, 150 W, 4Ohms)
  • Frequency response 5-50Khz -3dB
  • S/N Ratio >112dB
  • Size 440mm X 170mm X 467mm
  • Weight 43kg
TAD M2500 Power Amplifier TAD M2500 Power Amplifier TAD M2500 Power Amplifier TAD M2500 Power Amplifier